自营 ORPC-852S-TP-C

Shenzhen Orient Components Co ., Ltd ORPC-852

Copyright© 2020 Orient .All rights Reserved V3

1

2

1. Features (1) High collector- emitter voltage (VCEO = 350V) (2) High current transfer ratio ( CTR : MIN. 1000% at IF = 1mA, VCE = 2V ) (3) High isolation voltage between input and output (Viso = 5000 Vrms) (4) In compliance with RoHS, REACH standards (5) Safety approval

UL approved (No.E323844) VDE approved(No.40029733) CQC approved (No.CQC09001029446)

2. Description (1) The OR-852 series devices consist an infrared emitting diodes, optically

coupled to a high voltage photo Darlington detector. (2) The devices are in a 4-pin DIP package and available in wide-lead spacing

and SMD option.

3. Applications (1) Telephone set,telephone exchangers (2) System appliances,measuring instruments (3) Sequence controllers (4) Signal transmission between circuits of different potentials and

impedances

4. Absolute Maximum Ratings at Ta=25℃ Parameter Symbol Rated Value Unit

Input

Forward Current IF 60 mA Peak forward current

(100μs pulse, 100Hz frequency) IFP 1 A

Reverse Voltage VR 6 V Power dissipation PD 60 mW

Output

Collector and emitter Voltage VCEO 350 V

Emitter and collector Voltage VECO 0.1 Collector Current IC 150 mA Consume Power PC 150 mW

Total Power Dissipation Ptot 200 mW *1 Isolation Voltage Viso 5,000 Vrms

Operating Temperature Topr -50 to + 110 ℃Storage Temperature Tstg -55 to + 125

*2 Soldering Temperature Tsol 260 1. AC For 1 Minute, R.H. = 40 ~ 60%

Isolation voltage shall be measured using the following method.

(1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave.

2. For 10 Seconds