NJM2741

- 2 - Ver.2012-10-30

■ ABSOLUTE MAXIMUM RATINGS

(Note1) For supply voltage less than 15V, the absolute maximum input voltage is equal to the supply voltage. (Note2) On the PCB “ EIA/JEDEC (76.2×114.3×1.6mm, two layers, FR-4) “

■ OPERATING VOLTAGE (Ta=25˚C)

■ ELECTRICAL CHARACTERISTICS ●DC CHARACTERISTICS (V+=5V,Ta=25˚C)

PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT Operating Current ICC RL=∞, VIN=2.5V,

No Signal Apply - 2.2 3.3 mA

Input Offset Voltage VIO RS ≤ 10kΩ - 1 6 mV Input Bias Current IB - 100 350 nA Input Offset Current IIO - 5 100 nA Large Signal Voltage Gain AV RL≥10kΩ to 2.5V,

Vo=0.5V to 4.5V 65 85 - dB

Common Mode Rejection Ratio CMR 0V ≤ VCM ≤ 4V 60 75 - dB Supply Voltage Rejection Ratio SVR V+=2.5V to 14V, VCM=V+/2 60 80 - dB

VOH RL=5kΩ to 2.5V 4.75 4.9 - V Output Voltage VOL RL=5kΩ to 2.5V - 0.1 0.25 V

Input Common Mode Voltage Range

VICM CMR ≥ 60dB 0 - 4 V

●AC CHARACTERISTICS (V+=5V,Ta=25˚C)

PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT Unity Gain Bandwidth GB f=10kHz, RL=10kΩ to 2.5V - 10 - MHz Phase Margin ΦM RL=10kΩ to 2.5V, CL=10pF - 75 - Deg Equivalent Input Noise Voltage VNI f=1kHz, VCM=2.5V - 10 - nV/√Hz Total Harmonic Distortion THD f=1kHz, AV=+2

RL=10kΩ to 2.5V, Vo=1.5Vrms - 0.001 - %

●AC CHARACTERISTICS (V+=5V,Ta=25˚C)

PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT Slew Rate SR (Note 3), AV=1, VIN=2Vpp

RL=10kΩ to 2.5V, CL=10pF - 3.5 - V/µs

(Note 3) Number specified is the slower of the positive and negative slew rates.

PARAMETER SYMBOL RATINGS UNIT Supply Voltage V+ 15 V Differential Input Voltage Range VID ±15 (Note1) V Common Mode Input Voltage Range VICM 0 to 15 (Note1) V

Power Dissipation PD 390[SOT−23−5] (Note2) 280[SC88A] (Note2) mW

Operating Temperature Range Topr -40 to +85 ˚C Storage Temperature Range Tstg -50 to +125 ˚C

PARAMETER SYMBOL RATINGS UNIT Supply Voltage V+ 2.5 to 14 V